TB-500 fragment

TB-500 fragment

Product Name: TB500 Fragment
CAS No.: 885340-08-9
Sequence: Ac-Lys-Lys-Lys-Thr-Glu-Thr-Gln-NH₂ (Ac-LKKTETQ)
Molecular Formula: C₃₈H₆₈N₁₂O₁₃
Molecular Weight: 900.02 Da
MOQ: 1G
Assay: 98%
Available package: 1g, 5g, 10g;100g
Sample Available: Yes
Delivery Time:in stock
Usage: For scientific research use only.
Delivery Time:in stock
Can't sell to individuals
  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service

Product Introduction

TB-500 fragment Research Peptide

Xi'an Yihui Kangyuan Bio-technology Co., Ltd. supplies research peptides to institutional and business buyers. Its TB-500 fragment is listed as a white to off-white lyophilized powder for scientific research only, and sales to individuals are prohibited. The specifications below repeat the supplied product data, including an assay of 98% and HPLC purity of ≥98%. Before you buy, ask for confirmation of the peptide identity and review the documents for the batch offered. Samples are listed as available; when you request a quotation, confirm current stock, packaging, and shipment timing.

product-1-1

Specifications

Parameter Specification
Product Name TB500 Fragment
CAS No. 885340-08-9
Sequence Ac-Lys-Lys-Lys-Thr-Glu-Thr-Gln-NH₂ (Ac-LKKTETQ)
Molecular Formula C₃₈H₆₈N₁₂O₁₃
Molecular Weight 900.02 Da
MOQ 1G
Assay 98%
Available package 1g, 5g, 10g; 100g
Sample Available Yes
Delivery Time in stock
Usage For scientific research use only.
Appearance White to off-white lyophilized powder
Purity (HPLC) ≥98%
Source Solid-phase peptide synthesis
Solubility Soluble in sterile water and PBS buffer
Storage Condition Sealed at -20℃, protected from light and moisture
Shelf Life 24 months under recommended storage
Note For research use only. It is the active fragment of Thymosin β4 for wound healing, angiogenesis and tissue repair research.

The table repeats the original Product Specifications without changing values or adding parameters from other page sections. It does not infer or insert information missing from those specifications. Before ordering, confirm any additional requirements through the applicable product technical documents.

COA 

Test Items

Standard

Test Results

Appearance

This product is white or off-white powder.

White powder

Solubility

Soluble in water

Conforms

Test

Water content

≤8.0%

3.7%

Acetic acid

≤15.0%

3.1%

Trifluoroacetic Acid

≤0.5%

0.02%

Residual solvent

Methanol≤0.3%

0.004%

Acetonitrile≤0.041%

0.003%

DMF≤0.088%

ND

Related Substances

Max single impurity≤1.0%

0.25%

Total impuritiess2.0%

0.53%

Purity

≥98.0%

99.4%

Bacterial Endotoxin

<10EU/mg

Conforms

Assay of Peptide

≥75.0%

92.6%

Conclusion

This product is tested according to In house standard,    Results: Conform

Storage Conditions

Protected from light; sealed;store at -20±5℃

Identity Verification Before Purchase

The supplied sequence entry has an inconsistency: "Ac-Lys-Lys-Lys-Thr-Glu-Thr-Gln-NH₂" starts with three lysine residues, while "Ac-LKKTETQ" starts with leucine under standard one-letter amino acid notation. Both descriptions are kept above exactly as provided; neither has been treated as the verified sequence.

Before you order this product, ask for a confirmed sequence and for documents that link that sequence to the listed CAS number, molecular formula, and molecular weight. Clear up the discrepancy before you accept the material for an experiment.

Research Scope and Evidence Boundaries

The supplier's specification calls this product a thymosin β4 fragment for research on wound healing, angiogenesis, and tissue repair. These descriptions only name proposed research uses; they do not show that the supplied batch will produce a particular biological result.

The page you provided does not include any identifiable publications or product-specific biological test reports that support its claims about actin regulation, cell migration, inflammation, or tissue regeneration. Do not treat those claims as verified performance characteristics or as evidence of clinical effectiveness.

This material is for scientific research only. It is not for therapeutic use, and sales to individuals are not allowed.

Quality Review and Batch Documents

For This product, the specification lists an assay of 98% and an HPLC purity of ≥98% as separate values. Keep them as distinct reported values and ask for the analytical methods used and the batch results. Do not assume the two measurements are interchangeable.

Yihui says it provides COA, MSDS, and chromatogram reports. Ask which of these documents are available for the batch you are offered and whether they will come with the shipment. Check them against your laboratory's purchasing and acceptance requirements.

HPLC purity on its own does not confirm the peptide's identity, its biological activity, or whether it suits a particular assay. The sequence discrepancy should be addressed during the identity review.

The company also states that it follows GMP management practices, holds ISO9001 and ISO14001 certifications, and provides SGS test reports. If these matter for supplier qualification, ask for current supporting documents and check what they cover. Credentials for the company as a whole do not certify this specific product. We also supply the TB-500 fragment in custom sizes to suit your drawing.

TB500 fragment

Solubility, Handling, and Storage

The specifications list solubility in sterile water and PBS buffer. They do not give a reconstitution concentration or volume. Choose preparation conditions based on your validated research protocol and any relevant product handling documentation.

Keep the powder sealed at -20℃ and protect it from light and moisture. Under the recommended storage conditions, the stated shelf life is 24 months.

The supplied handling guidance advises avoiding repeated freeze-thaw cycles after reconstitution. No separate shelf life is given for prepared solutions, so the powder shelf life should not be applied to reconstituted material.

Supplier and Technical Support for TB-500 fragment

Xi'an Yihui Kangyuan Bio-technology Co., Ltd. was established in 2010 in Xi'an, Shaanxi Province. Its work covers research, production, sales, and technical support for pharmaceutical raw materials, fine chemicals, and peptides.

The company says it offers help choosing products, support with applications, and help arranging third-party testing or factory audits. Ask which of these services apply to your order, and whether there are extra conditions or charges.

Before you buy, ask for the written terms that apply if you need to return or exchange an item because of a quality problem.

TB500 fragment

Ordering, Packaging, and Export Support

To get a quotation for the TB-500 fragment, provide your organization's details, the quantity you need, your preferred package size, the destination, and what documentation you need. Also state when you need the shipment, so we can check availability against your procurement schedule.

The MOQ shown is 1G, and samples are available. Packaging comes in 1g, 5g, 10g, and 100g options. The "in stock" entry in the table only describes listed availability, not a confirmed dispatch or transit time.

You can discuss custom packaging and other OEM or ODM requests with the supplier. Put any changes in writing and agree on them before ordering; they do not change the research-only restriction.

Yihui says its export support includes help with choosing shipping channels, customs clearance, and compliance documents. Confirm the arrangements for your destination, including packaging, transport conditions, and buyer responsibilities.

Purchasing FAQ

Q: What should be confirmed first?

A: Check the peptide sequence against the listed identifiers. The full and abbreviated sequences do not match now, so settle this before buying or using it in experiments.

Q: Can I request a sample?

A: Yes. The specifications say samples are available. Ask about sample size, whether it is available, the cost, and supporting documents.

Q: Does "in stock" mean immediate shipment?

A: No dispatch time is confirmed. Ask whether the item is available now and when it will ship for your quantity and destination.

Q: What if my protocol requires additional parameters?

A: Ask for the technical documentation that applies to the product. If the original specifications do not give a parameter, do not assume it, do not estimate it, and do not take it from general marketing descriptions.

Q: Can individuals purchase this material?

A: No. We sell only to institutions and business buyers, and only for scientific research use.

Contact

To ask for a quote or a sample, send wholesale or export inquiries about TB-500 fragment to sales@yihuipharm.com.